Skip to main content

How to Hide Drives in Windows 10 (Complete Guided Steps)


WINDOWS 10

Have you ever been concerned about people accessing the data on your Windows computer? You hand over your computer to someone for a specific reason, and they end up going through your personal data. Most probably, you’ve been looking for ways to protect your data. Sure, you can always encrypt your drive for security, but the encryption process takes very long. Moreover, once you enter the password, the drive remains decrypted until the next time you log on. And you wouldn’t want to log off your computer every time you have to step away from it, would you?

What if I tell you there was a better way to achieve what you’re looking for? Imagine if you could hide your disk drives from your File Explorer in such a way that their data can still be accessed by you. Yes, it is possible. In fact, there are more than a single way to do this. So, without any further ado, here are the best ways to hide drives in Windows 10:
Note: I’m showing the process on my Windows 10 Creators Edition PC, but the process should work on Windows 8.1, 8, and 7 as well.

Hide Drive But Still Access It

It is possible that you hide a disk drive from the File Explorer, and still be able to access its data. In fact, this particular method can be achieved using either of the two ways – Local Group Policy Editor or Registry Editor. Following are the step-by-step instructions on how to hide a disk drive using either of the ways:


  • Using Local Group Policy Editor

  1. Open Local Group Policy Editor by typing “gpedit.msc” in the Run command window.
Run - GP

2. Now, navigate to the following directory:
User Configuration/Administrative Templates/Windows Components/File Explorer

3. Here you will see a list of different settings. Double-click the one that says “Hide these specified drives in My Computer”.

Local Group Policy Editor

4.  From the window that pops up, change the configuration to “Enabled”.

Change Configuration Group Policy

5. From the same window, choose any option that you desire from the drop-down menu of “Pick one of the following combinations”. I’ll be choosing “Restrict D drive only” for demonstration.

Restrict Drive

 6. Click on “OK” to save your changes.
Now, you won’t be able to see the disk drive if you open your File Explorer.

Drive Hidden - GP

If you still want to access your data, you can enter the path either in the Run command or in the address bar of your File Explorer and hit Enter. For example, if I want to view my ‘D’ drive, I’ll open the Run command window and type “d:/”.

View Drive - GP

If you want to revert back to your previous settings, change the configuration in the 4th step to either “Not configured” or “Disabled”.


  • Using Registry Editor

  1. Open Registry Editor by typing “regedit” in the Run command window.
Regedit

2. Now navigate to the following path:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer

3. Once there, right-click on anywhere on the white space of the Right Pane –> New –> DWORD (32-bit) Value.
New Registry Key
 

4. You’ll have to rename it to “NoDrives” without the quotation marks.

NoDrives

5. Now double-click on this registry key and change the base to “Decimal”. In the “Value data” input, enter the value corresponding to the drive’s path that you want to hide from the list below:
A –> 1      G –> 64      M –> 4096        S –> 262144       Y –> 16777216
B –> 2      H –> 128    N –> 8192         T –> 524288       Z–> 33554432
C –> 4      I –> 256     O –> 16384       U –> 1048576
D –> 8      J –> 512     P –> 32768        V –> 2097152
E –> 16    K –> 1024   Q –> 65536       W –> 4194304
F –> 32     L –> 2048   R –> 131072      X –> 8388608
If you want to hide all your drives, enter 67108863. If you want to hide multiple drives, but not all, enter the sum of the values corresponding in the table above. For example, if you were to hide D and E drives, you would have to enter 24 (8 + 16). In my case, I’ll type ‘8’ as I want to hide my ‘D’ drive.

Edit Registry Key

6. Now click on “OK” and then restart your computer.
To revert back your changes, you can either change the “Value data” to ‘0’ or delete the registry key altogether.

 

Remove a Drive’s Path Name

If you’re still feeling a little concerned about your privacy after reading the methods to hide your disk drive, you can take a step further. You can remove the letter allotted to a drive altogether. This way no one can access a drive which, literally, has no path. This method, too, can be implemented using two ways – Disk Management or Command Prompt.

  • Using Disk Management

  1. Open disk management by opening the Run command window and typing “diskmgmt.msc”.

Disk Management Run

2. Now you’ll see the list of disk drives that are present on your computer. Right-click on the drive you want  its path, and select “Change Drive Letter and Paths…”. I’ll again do it for my ‘D’ drive for demonstration.

Change Path

3. From the window that pops up, select “Remove”, then choose “Yes”.

Drive Letter

Now, you will have a partition with no path allotted. No one will either be able to see it in the File Explorer or access it by any means.
If you want to revert back your changes, repeat steps 1 and 2, and from the window that pops up, select “Add”. You can now assign the same letter or even a different one if you want.

Assign Letter


  • Using Command Prompt

  1. Open the Command Prompt in Administrator mode. To do this, you can press Windows+X, followed by ‘A’.
  2. In the Command Prompt window, type “diskpart” and hit enter. This should change your directory to “DISKPART”.
Diskpart

3. Now type “list volume” and hit Enter. This will show you the disk partitions that are present on your system.

List Volume

4. After this, type “select volume” followed by the number that is present against the drive that you want to remove the path for. You’ll get a confirmation message. In my case, to remove ‘D’, I’ll type “select volume 3”.

Select Volume

5. After the confirmation message, type “remove letter” followed by the letter of the drive. You’ll get a confirmation message. In my case, I’ll be typing “remove letter D”.

Remove Letter

This method will again leave you with an unallotted drive. To revert back, follow steps 1 through 4, and then type “assign letter” followed by the letter you want to assign to that drive.

Assign Letter - CMD

Now that you know how to hide your computer’s drives from others, you can hand them your computer without worrying about them accessing your data. Your data will be hidden from view, but you’ll know how to access it.


WE HOPE THAT YOU ARE FINDING OUR POSTS HELPFUL,KEEP CLICKING AND HELP US REACH TO GREATER HEIGHTS.
  • THANKS FOR VIEWING.
PLEASE DO COMMENT IF U NEED OUR POSTS TO BE MORE BETTER AND APPEALING



For the latest tech news and reviews, follow TechYOlogy on Facebook,.

Comments

Popular posts from this blog

How to Check your MotherBoard's Configurations and Details

If you want to update your drivers, check your hardware's compatibility, or you’re just curious about details of your Hardware, it’s a lot easier to check your motherboard's Configuration and Details with these simple tools and commands than to crack open your case to check the board itself. Here’s are the steps how to check your motherboard's Configuration details by simply using your Keyboards. Why Do I Want To Do This?(You should be thinking this) Knowing your motherboard’s Configuration and Details is important if you’re thinking of upgrading your drivers, buying new hardware (you’ll need the proper expansion or memory slots, for example), or just checking the capabilities of your board if you’re considering upgrading your whole rig. If you kept the paperwork that came with your computer (or the individual components, if you built it yourself), you can often times reference that. Even then, it’s best to check to make sure the documentation is correct...

10 Useful Windows Commands You Should Know

There are some things you can only do from the command line—even in Windows. Some of these tools don’t have graphical equivalents, while others are just plain faster to use than their graphical interfaces. If you’re into using PowerShell over Command Prompt, you should note that all the commands we’re covering in this article work just the same in either tool. And obviously, we can’t possibly cover all the useful commands that these tools offer. Instead, we’ll be focusing on commands that should be useful even if you’re not a command-line person ipconfig: Quickly Find Your IP Address  You can find your IP address from the Control Panel, but it takes a few clicks to get there. The ipconfig command is a fast way of determining your computer’s IP address and other information, such as the address of its default gateway—useful if you want to know the IP address of your router’s web interface. To use the command, just type  ipconfig  at the Comm...

Hardware Upgrade: How To Install New RAM

RAM is one of those upgrades everyone seems to skimp on when buying a PC, only to later wish for more. Regretting your underpowered memory purchase? Here’s how to speed up your machine by installing some additional memory. Memory is often one the critical bottlenecks on a PC, so faster, larger stores of RAM can go a long way to making your PC perform better and with more stability. It’s not hard, even for beginner geeks. Crack open that PC in today’s hardware upgrade! Identifying and Buying Your New RAM (The Hard Part)    Your RAM is likely installed in these slots on your motherboard, called the DIMM slots. This motherboard has room for six sticks of memory. Note the pins and how the RAM lines up with them—important to note to install properly. The median is off center to show you clearly which direction to orient them. If you’re strong, you can probably force them in backwards, but computers don’t really respond well to that kind of bullying. ...
VigLink badge